Helpful Hints For Refinishing Floors

Hardwood floor refinishing and sanding is unforgiving work. If any mistake made, it will show. Though, a refinished floor can enhance the look of a room like no other project. To hire a professional to sand, stain, seal, and apply various finish coats. Here are some necessary tips about how to refinish hardwood flooring Toronto.

1.    Select Diy Friendly Sanding Equipment

Unless you plan to sand many floors in your floors in your lifetime, random orbital sanders are the best for DIY floor refinishing. They take longer to remove old finishes but they do not need a lot of experience to use and never damage your floor.

2.    Watch Your Back

Remember not to pick a lot of sanders from the rental store to your house. Always take help of a helper. Use ramps to move the machine whenever possible.

3.    Take Precautions

Hardwood floor refinishing and sanding produces fumes and dust. Use dust masks and earplugs. When applying sealers and oil-based polyurethane, eye protection with splash guards, neoprene or vinyl gloves.

4.    Don’t Forget the Corners

A palm sander is used to sand near baseboard moldings, but use a sharp scraper to eliminate any areas of old finish the sander may miss. Scrapers allow getting into recesses without having to eliminate a lot of material with the sander.

5.    Don’t Get Too Aggressive

Use coarse grit abrasives to eliminate the old finish and surface scratches. Continue with abrasives that are slowly finer until you reach the desired degree of smoothness. Precede row by row, overlapping runs by half the sander’s width.

6.    Have An Exit Strategy

Begin your applications along the wall opposite the door you intend to exit. Work in parallel rows toward the wall with the door. When you get close, you will have to change your work pattern and work from the end walls toward the door. Apply a little additional poly and count on its self-leveling properties for a smooth finish and get Toronto flooring Installers.